Description for SPLITTERS
ANTRONIX 2 – WAY SPLITTER CMC2002H-A
ANTRONIX 3 – WAY SPLITTER CMC2003H-A
ANTRONIX 4 – WAY SPLITTER CMC2004HC-A
ANTRONIX 6 – WAY SPLITTER CMC2006VC-A
ANTRONIX 8 – WAY SPLITTER CMC2008HC-A
Features & Benefits for ANTRONIX SPLITTER
Reliability, quality and performance define the Antronix CMC2000 series digital splitter. These horizontal and vertical digital splitters have been designed specifically for today’s two-way broadband networks.
6 kV Ring Wave Surge Protected: All ports are protected against multiple 6 kV ring wave surges per IEEE specification C62.41 Category A3.
Digital Broadcast & HDTV Ready: Compatible with existing and future networks.
Flat 1 GHz Bandwidth with Minimal Insertion Loss: Supports present and future multimedia applications including video, data and telephony.
Zinc Alloy Diecast Housing & Backplate w/ Proprietary Nickel Alloy Plating: Superior corrosion resistant plating combined with a diecast backplate protects the back of the housing where corrosion is more prominent.
100% Soldered Back: Ensures repeatable 120 dB RFI shielding.
1 inch Port-to-Port Spacing Flat 15 psi Sealed, SCTE Compliant F-Port: Prevents water migration in to the splitter and ensures an excellent ground connection.
UV Resistant Label
Operating Temperature: -40 degree to 60 degree Celsius
•••NOT FOR SATELLITE USE•••
COMMSCOPE 2 – WAY SPLITTER SV-2G
COMMSCOPE 3 – WAY SPLITTER SV-3G
COMMSCOPE 4 – WAY SPLITTER SV-4G
Features & Benefits for COMMSCOPE SPLITTER
Its Plated Housing is Soldered Closed and Sealed from the Environment, as well as Transient and Spike Voltage Resistant. The Finish is designed to Resist Corrosion due to Weather. It will pass 1 GHz worth of Forward and Return signals; making it perfect for Splitting Cable TV with High-Speed Internet and Pay per View DVR Box Connection Signals. The Voltage Protection also makes it suitable for splitting HD TV Antenna Signals as well. The Flat F Connector ends means that the connection to the RG coaxial cable you use (RG6 or RG11) is solid, secure and doesn’t slip or back off after tightened with appropriate force (most Coaxial Cable Manufacturers specify in inch/pounds). When making RG6 or RG11 cable connections outside, a weather boot covering and some sort of Silicone compound are highly recommended.
Innovative four-sided center conductor contact provides superior retention and electrical performance
Utilizes surface mount technology
6kV ring wave surge protection on all ports
Intermod protected
40 dB port-to-port isolation in the return band
Flat-end “F” ports for proper ground plane match
Better than 120 dB RFI protection
Moisture sealed housing (15psi) with two layers of protection against corrosion
Solder sealed proprietary backplate
No casting lines on ports
Also available in vertical, power passing, mini and wall mount versions
•••Not for Satellite Usage•••
COMMSCOPE SV-DC6G
Features & Benefits for COMMSCOPE SV-DC6G
Premium end-to-end RF system solutions
High-quality subscriber drop solutions
Exceptional drop cable solutions
Sophisticated noise reduction solutions
•••Not for Satellite Usage•••
HOLLAND DIPLEXER – DPD2 (DISH NETWORK APPROVED)
Features & Benefits for HOLLAND DIPLEXER DPD2
The DPD2 allows the combining and/or separating of Off-Air / CATV signals with satellite signals to a common cable. Separates TV and satellite signals prior to satellite receiver input and filters harmonics in the off-air spectrum from satellite conversion devices. The DPD2 diplexer is specifically designed for Dish Network’s™ DP44 installations, requiring continuous 2 amp power passing. This diplexer provides a high performance, lower insertion loss, high return loss and increased stop band isolation. The DPD2 provides a more reliable combining solution for the increased demands of the DishPro Plus installations, which may require 2 amps of current.
Holland Diplexer splitters have been designed for residential and commercial applications. The industry’s standard, this little splitter easy easy to work with and effecient. It features solder back design offering excelent EMI/RFI shielding, diode protected circuitry (passes DC power from any outputs to inputs), precision machine threaded F ports, and PCB design.
Designed Specifically for DP44 Switch / Color Coded Insulators
Low Insertion Loss
High Return Loss
Increased Stop Band Isolation
Ultra-Flat Response
5 – 2150 MHz Wideband Operation
Solder Black Sealed (140 dB RFI Shielding)